SICK DT35S User Manual

7.3.4.5 IO-Link process data
Process data is cyclically transferred via IO-Link from the device to the IO-Link master. It
is possible to configure the content of this process data:
•
Distance + Q1 + Q2 (process data format0)
•
Distance + Signal quality (process data format4)
For details, see "Process data", page 44.
The process data setting affects, among other things, the visual display on the Main
settings & visualization page.
7.3.5 Device information
This page shows detailed device information. This information is not required for normal
operation. If a fault arises in the device, please inform technical support.
COMMISSIONING AND CONFIGURATION 7
8027663//2022-08-04 | SICK O P E R A T I N G I N S T R U C T I O N S | DT35S
43
Subject to change without notice

SICK DT35S Specifications

General

Brand	SICK
Model	DT35S
Category	Safety Equipment
Language	English