Need help?Do you have a question about the SICK deTec4 and is the answer not in the manual?
General| Brand | SICK |
|---|---|
| Model | deTec4 |
| Category | Safety Equipment |
| Language | English |
Explains the manual's purpose, scope, and target audience for the safety light curtain.
Defines covered products, document identification, and available language versions.
Identifies target users and lists relevant chapters for each group.
Guides users to find further product information and resources online.
Explains safety symbols, action instructions, and LED status indicators.
Critical warnings for correct integration, electrical safety, and product modification.
Specifies intended applications like hazardous point, access, and area protection.
Lists unsuitable applications like outdoor, underwater, or explosion-hazardous areas.
Defines necessary qualifications and expertise for personnel involved in installation and operation.
Explains the basic components and operational principles of the safety light curtain.
Details features like device overview, calibration, beam coding, muting, IO-Link, NFC, system plugs, and status indicators.
Illustrates typical use cases for hazardous point, access, and area protection.
Outlines responsibilities and safety considerations for the machine manufacturer.
Details responsibilities and safety considerations for the machine operator.
Covers scanning range, distances, interference, resolution, muting, and Smart Box Detection planning.
Provides critical safety information and precautions related to mounting the device.
Instructions for checking product completeness and integrity upon unpacking.
Details the procedure for attaching the system plug before installation.
Guides through the physical installation process using QuickFix, FlexFix, and upgrade brackets.
Crucial electrical safety warnings: voltage, startup, and wiring precautions.
Details pin assignment and wiring for the 5-pin M12 system connection.
Provides pin assignment for the 8-pin M12 system connection (SP1/SP2).
Explains the pin assignment for the M12 5-pin extension connection.
Introduces configuration options via DIP switches and system plugs.
Shows how various functions can be combined using the SP2 system plug.
Details default configurations and procedures for resetting functions to factory settings.
Describes how the device enters and operates in configuration mode for adjustments.
Explains setting beam coding via DIP switches for interference prevention.
Guides on configuring muting functions, including cross-muting and partial blanking.
Details setting scanning range and dynamic protective field widths via DIP switches.
Explains configuring reduced resolution using DIP switches for object detection.
Describes enabling smart presence detection via DIP switches on the receiver.
Details configuring Smart Box Detection via DIP switches for object differentiation.
Explains checking and setting parity using DIP switches for configuration validation.
Provides instructions on configuring the restart interlock for safe machine startup.
Guides on configuring external device monitoring (EDM) for safety circuit checks.
Details configuring output signals for application diagnostics on system/extension connections.
Explains connecting multiple safety light curtains in a cascade for extended fields.
Describes OSSD and protective field status indicated via LEDs on sender/receiver.
Critical safety precautions to follow during the commissioning process.
Outlines prerequisites and general steps for commissioning the safety light curtain.
Describes LED indications and device behavior upon initial power-on.
Guides on aligning sender/receiver, using brackets, and interpreting alignment quality indications.
Emphasizes thorough checks after initial commissioning and any modifications.
Explains obtaining status, diagnostic, and troubleshooting info via LEDs, IO-Link, or NFC.
Critical safety precautions during normal operation of the device.
Outlines performing regular checks to ensure safety function effectiveness.
Explains sender and receiver LED indications during normal operation.
Provides instructions and precautions for cleaning the safety light curtain's front screens.
Defines the process for performing regular checks to ensure safety functions are met.
Explains accessing status, diagnostic, and troubleshooting via LEDs, IO-Link, or NFC.
Critical safety warnings and procedures for troubleshooting.
Details LED indications for configuration, status, alignment quality, and fault reporting.
Provides instructions for the proper disposal of the device according to regulations.
Lists device versions and details the range of functions available for the receiver.
Presents general system data: protective field, resolution, and electrical specifications.
Provides response time data for single devices and cascades, including Smart Box Detection effects.
Details typical power consumption for sender/receiver by height and resolution.
Specifies maximum cable lengths for various connections and systems in single and cascade setups.
Lists the weights of the sender and receiver based on their protective field height.
Provides detailed dimensional drawings of sender and receiver by protective field height.
Lists the items included in the sender and receiver package.
Provides part numbers and type codes for system plugs and deTec4 devices.
Details ordering info and drawings for QuickFix and FlexFix mounting brackets.
Lists ordering info for mounting accessories, including alignment tools.
Explains function and ordering info for the weld spark guard accessory.
Provides ordering info for various M12 connecting cables and connectors.
Lists ordering info for alignment aids like AR60 laser alignment aid and adapters.
Details function, use, mounting, and ordering info for deflector mirrors.
Provides ordering info for mirror columns based on height.
Lists ordering info for device columns by height and installation length.
Specifies recommended cleaning agents and tools for the safety light curtain.
Provides ordering info for test rods of different diameters and holders.
Lists ordering data for muting lamps, sensors, reflectors, and brackets.
Lists ordering info for additional accessories like muting arms and labels.
Info on obtaining declarations of conformity and certificates for the product.
Lists relevant regional standards similar or identical to international standards.
To Next Page
