SICK DT50-2 Pro

6.4.7.1.1 Operating example via display: Change user level to Advanced
Select and activate the “Advanced” user level
Operating example or steps:
RUN mode
→ Q
1
Output
/ to → Device
→ User level
→ Easy
/ to → Advanced
→ Saved
to → RUN mode
Necessary default settings:
-
Factory setting:
Easy
6.4.7.2 Lock
The pushbuttons on the sensor display can be locked to prevent unintentional actua‐
tion.
If a pushbutton is pressed when the lock function is active, the text “Locked” appears
on the display.
6.4.7.2.1 Operating example via display: Lock
Activate lock function
Operating example or steps:
RUN mode
→ Q
1
Output
/ to → Device
→ User level
/ to → Lock
→ No
/ to → Yes
→ Saved
→ Locked appears when a pushbutton is pressed
Necessary default settings:
-
Factory setting:
No
Deactivate lock function
Operating example or steps:
RUN mode
Press and hold for 5 seconds → Unlock
Necessary default settings:
Lock function activated = Yes
Factory setting:
No
6.4.7.3 Display Off
The display can be switched off. This also simultaneously deactivates the keyboard on
the display.
If a pushbutton is pressed when the display is off, the display temporarily switches on
again. The messages “Display” and “Off” appear in alternation.
6 OPERATION
64
O P E R A T I N G I N S T R U C T I O N S | DT50-2 Pro 8017154/1AVV/2021-03-24 | SICK
Subject to change without notice