10 Decommissioning
10.1 Disposal
CAUTION
Risk of injury due to hot device surface.
The surface of the device can become hot during operation.
•
Before performing work on the device (e.g. mounting, cleaning, disassembly),
switch off the device and allow it to cool down.
•
Ensure good dissipation of excess heat from the device to the surroundings.
If a device can no longer be used, dispose of it in an environmentally friendly manner
in accordance with the applicable country-specific waste disposal regulations. Do not
dispose of the product along with household waste.
NOTICE
Danger to the environment due to improper disposal of the device.
Disposing of devices improperly may cause damage to the environment.
Therefore, observe the following information:
■
Always observe the national regulations on environmental protection.
■
Separate the recyclable materials by type and place them in recycling containers.
10 DECOMMISSIONING
64
O P E R A T I N G I N S T R U C T I O N S | Lector63x Flex C-mount and S-mount 8018071/1E1C/2021-12-16 | SICK
Subject to change without notice
To Next Page
Loading...
