Siebert S102 Series - Table of Contents

BAL S102 PFN RT 1.00 4/24
Pos: 8 /Siebert/ Bedienungsanleit ungen/Modul In haltsverzeich nis @ 1\mod _1352981287156_ 48.docx @ 51 55 @ @ 1
Table of contents
1 Contact 2
2 Legal note 3
3 Safety precautions 6
Important information ......................................................................................................................................... 6
Safety ................................................................................................................................................................. 6
Intended use ....................................................................................................................................................... 6
Mounting and installation .................................................................................................................................... 6
Grounding ........................................................................................................................................................... 6
EMC measures ................................................................................................................................................... 6
Disposal .............................................................................................................................................................. 7
4 Model designation 8
Model designation .............................................................................................................................................. 8
5 Quick start for numerical operation mode (INT32 format) 8
Step 1: Open project .......................................................................................................................................... 8
Step 2: Switch to project view ............................................................................................................................ 8
Step 3: Install the GSDML file of the ad and add the display ............................................................................. 9
Step 4: Establish a connection to the display ..................................................................................................... 9
Step 5: Add sub-modul to the display and define address range .................................................................... 10
Step 6: Assign a PROFINET device name to the display ................................................................................ 11
Step 7: Download configuration in the controller.............................................................................................. 11
Step 8: Transmit data to the display ................................................................................................................. 12
6 Quick start for alphanumeric operation mode (ASCII format) 13
Step 1 to 4: See quick start for numeric operation mode (INT32 format) ........................................................ 13
Step5: Add sub-modul to the display and define address range ..................................................................... 13
Step 6 and 7: See quick start for numeric operation mode (INT32-Format) .................................................... 13
Step 8: Transmit values and texts to the display .............................................................................................. 14
7 Messages on the display 15
8 Further settings 16
9 Setting the display settings during initialization (numeric operation mode only) 17
Decimal points Decimal Dots (property number 1) .......................................................................................... 17
Offset, scale factor (multiplier), and divisor (property numbers 2, 3 and 12) ................................................... 17
Threshold values Range (property numbers 4 und 5) ..................................................................................... 17
Flags (property number 6) ................................................................................................................................ 17
Attributes for flashing and blinking (property numbers 7 and 9) ...................................................................... 18
Format (property numbers 10 and 11) ............................................................................................................. 18
10 Flashing modes and display attributes 19
11 Flags 20