Siebert S102 Series - Step 3: Install the GSDML File of the Ad and Add the Display; Step 4: Establish a Connection to the Display

BAL S102 PFN RT 1.00 9/24
Step 3: Install the GSDML file of the ad and add the display
Install the GSDML file of the display. You find the file on the supplied data carrier or at www.siebert-
group.com. After installation, the display is listed in the hardware catalog. Add the module 'siebert-
display' to 'Devices & Networks/Network view'.
Pos: 20 /Siebert/B edienungsanlei tungen/Seri e S102/SX102/Quic k-Start für numerische Betrie bsart (INT32-F ormat)/S102 Sc hritt 4: Verbind ung zur Anz eige herstellen PFN R T @ 4\mo d_148516763 8878_48.docx @ 26854 @ 2 @ 1
Step 4: Establish a connection to the display
Assign the display to the desired control in the network view. Then the PROFINET connection is
shown.
Pos: 21 /Siebert/B edienungsanlei tungen/Seri e S102/SX102/Quic k-Start für numerische Betrie bsart (INT32-Format)/S102 Sc hritt 5: Sub-M odul der Anz eige hinzufügen und Adressbereic h definieren PFN RT @ 4\ mod_14851684 79408_48.doc x @ 26861 @ 2 @ 1