Siegenia KFV GENIUS 2.2 PANIC - Safety; Required knowledge and capabilities; Intended use

5/455/4501.2020H39.ELEKS014EN-00

GENIUS 2.2 PANIC, Electromechanical mul-point lock
2 Safety
 

We assume and require that fabricators possess the
following knowledge and skills:
• knowledge of the regulaons concerning occupa-
onal safety and accident prevenon
• comprehension of technical correlaons according
to state-of-the-art science and technology
• knowledge of professional work steps
• knowledge of the applicable standards and direc-
ves
• knowledge of applicable tesng regulaons
• knowledge and skills with regard to material pro-
cessing of the respecve material (mber, PVC,
aluminium)
• knowledge and skills with regard to the professional
use of tooling, machines and systems for the pro-
ducon of door elements
• knowledge and skills with regard to the professional
mounng of technical elements
• knowledge in funconal tesng and operaon of
door elements
• knowledge of the requirements of prole system
providers
if the door elements are equipped with an electrome-
chanical drive, the following knowledge and skills are
presumed and required:
• knowledge and skills with regard to the professional
fabricaon of electrical components
We assume and require that ers and retroers
possess the following knowledge and skills:
• knowledge of the regulaons concerning occupa-
onal safety and accident prevenon
• comprehension of technical correlaons according
to state-of-the-art science and technology
• knowledge of professional work steps
• knowledge of the applicable standards and direc-
ves
• knowledge and skills with regard to the professional
use of electrical and mechanical tooling
• knowledge and skills with regard to the professional
mounng of technical elements
• knowledge and skills with regard to the retrot of
mechanical security technology on window or door
elements
if the door elements are equipped with an electrome-
chanical drive or a sensor, the following knowledge and
skills are presumed and required:
• knowledge and skills with regard to the professional
fabricaon of electrical components
• knowledge and skills with regard to the work steps,
connecng electrical components, commissioning
and funconal tesng
KFV oers training courses for the acquision of some
of the required knowledge and skills. Contact your KFV
sales consultant in case of requirement.
 
• The GENIUS 2.2 is suitable for installaon in mber,
aluminium, steel and PVC 1-sash and 2-sash en-
trance doors.
• The GENIUS 2.2 PANIC can be used as a panic lock in
accordance with EN 1125 (version EP or PE) or also
as an emergency exit lock in accordance with EN
179 (version EP or EE).
• Only install the GENIUS 2.2 PANIC in combinaon
with mutually tested and cered components like
the acvaon stop (in accordance with EN 1125),
lever handle (in accordance with EN 175) and frame
parts.
• Use the GENIUS 2.2 PANIC as shown below:
– with a non-restricve cylinder in accordance with
DIN 18252 and the designaon „FZG“
– with cylinder locks with rigid catch in which
the catch is locked in a key withdrawal posion
inside the range of -30° to +30°:
– in vercal installaon
– in a technically sound condion
– only with original KFV products and accessories
• When used in re escape doors or smoke protecon
doors, the GENIUS 2.2 PANIC must only be used in
combinaon with an uninterrupble power supply
(UPS).
• Do not use the GENIUS 2.2 PANIC in doors for wet
rooms or rooms in which the air contains aggressive
or corrosive components.