Synchronous Motors 1FK7
Operating Instructions, 03/2011, 610.40700.40c
5
Introduction
1
1.1 About these operating instructions
These operating instructions describe the motor and explain how to handle the motor from
the delivery up to disposal.
Before you start to handle the motor, you must read these operating instructions. to ensure
safe, problem-free operation and to maximize the service life.
These operating instructions are valid in conjunction with the relevant SIEMENS
Configuration Manual.
Siemens continually strives to improve the quality of information provided in these operating
instructions. If you find any mistakes or would like to offer suggestions about how this
document could be improved, please contact the Siemens Service Center.
Always follow the safety instructions and notices in these operating instructions. The warning
notice system is explained on the rear of the inside front.
Text format features
In addition to the safety-related notices and instructions that you must carefully observe, you
will find the text in these operating instructions is formatted in the following way:
1. Handling instructions are always shown as a numbered list. Always perform the handling
steps in the sequence given.
● Lists are formatted as bulleted lists.
– Lists at the second level are hyphenated.
Note
A Note is an important item of information about the product, handling of the product
or the relevant section of the document. Notes provide you with help or further
suggestions/ideas.
EUROSERVO SERVO MOTOR TAMİR MERKEZİ
WWW.EUROSERVO.COM.TR
To Next Page
Loading...
Need help?
General
