C-2
TP27, TP37 Equipment Manual
Release 01/00
Message Cause Remedy
Please wait Mode change in progress or recipe function
started.
Ready for trans-
fer
Waiting for data from PU/PC
Data transfer Data transfer between PU/PC and OP in prog-
ress
Firmware not
compatible
The firmware can not be used for the current
configuration
EPROM
memory failure
Memory module defective or internal hard-
ware fault
Send unit for repair quoting details of error
message
RAM memory
failure
Flash memory
failure
Memory module defective or transmission er-
ror
Retransfer configuration or send OP for repair
S
stem Messa
es
To Next Page
Loading...
