Siemens 7sg15 microtapp - Page 48

7SG15 MicroTAPP Performance Specification
©2010 Siemens Protection Devices Limited Chapter 2 Page 8 of 8
8.7 Radio Frequency Interference - IEC 60255-2-3 Class III
20MHz to 1000MHz, 10V/m
variation ≤ 5%
8.8 Fast Transient - IEC 60255-22-4 Class IV
4kV 5/50ns, 2.5kHz repetitive
variation ≤ 3%
8.9 Vibration (Sinusoidal) - IEC 60255-21-1 Class I
Vibration response, 0.5gn
variation ≤ 5%
Vibration endurance, 1.0gn
variation ≤ 5%
8.10 Seismic - IEC 60255-21-3 Class I
Seismic response, 1gn
variation ≤ 5%
8.11 Shock and Bump - IEC 60255-21-2 Class I
Shock response, 5gn, 11ms
variation ≤ 5%
Shock withstand, 15gn, 11ms
variation ≤ 5%
Bump test, 10gn, 16ms
variation ≤ 5%
8.12 Mechanical Classification
Durability
≥ 10
6
operations