Siemens 9410RC - Page 165

Specifications 9410 series
Measurement accuracy
Apparent power ± 0.5%
IEC 61557-12 Class 0.5
Current (per phase) ± 0.2%
IEC 61557-12 Class 0.2
Voltage (L-N) ± 0.2%
IEC 61557-12 Class 0.2
Frequency ± 0.02%
IEC 61557-12 Class 0.02
Power quality
IEC 61000-4-30 Class S
IEC 62586
Voltage unbalance ± 0.5%
IEC 61557-12 Class 0.5
Voltage harmonics ± 2%
IEC 61557-12 Class 2
Voltage THD ± 2%
IEC 61557-12 Class 2
Current harmonics ± 2%
IEC 61557-12 Class 2
Current THD ± 2%
IEC 61557-12 Class 2
Voltage inputs
Maximum VT/PT primary 1.0 MV AC
Specified accuracy range 57 to 400 V L-N / 100 to 690 V L-L (Wye) or 100 to 600 V L-L (Delta)
Specified accuracy frequency 42 to 69 Hz (50/60 Hz nominal)
Current inputs
Specified accuracy current range 50 mA – 10 A
AC control power
Operating range 50/60 Hz ± 10%: 90 to 415 V AC L-N ± 10%
400 Hz: 90 to 120 V AC ± 10%
Ride-through time 100 ms (6 cycles at 60 Hz) min., any condition
200 ms (12 cycles at 60 Hz) typ., 120 V AC
500 ms (30 cycles at 60 Hz) typ., 415 V AC
DC control power
Operating range 120 to 300 V DC ± 10%
Ride-through time 100 ms (6 cycles at 60 Hz) min., any condition
Digital outputs
Number 1
Type Form A solid-state
7EN05-0336-01 165