Siemens APACS+ - Options; Table 5-2 EAM Options

Model Designation SD39EAM-1r4
5-2 September 2005
5.2 Options
Table 5-2 lists the available EAM options. A selection of the type and quantity of terminaion assemblies
is made by the user. When marshalled termination assemblies (P/N 16190-1 or 16805-7) are selected, a
selection from the list of Interconnect I/O Cables must also be made.
Table 5–2 EAM Options
PART NUMBER DESCRIPITION
16189-1 EAM Local Termination Strip
16190-1 EAM Marshalled Termination Assembly
16805-7 EAM Marshalled Rail Termination Assembly (Consists of Phoenix Contacts)
16137-122 Interconnect I/O Cable Assembly 5.7 ft. (1.75 m)
16137-114 Interconnect I/O Cable Assembly 10 ft. (3 m)
16137-115 Interconnect I/O Cable Assembly 26.2 ft. (8 m)
16137-116 Interconnect I/O Cable Assembly 49.2 ft. (15 m)
16137-117 Interconnect I/O Cable Assembly 98.4 ft. (30 m)
16137-118 Unterminated Interconnect I/O Cable Assembly 10 ft. (3 m)
16137-119 Unterminated Interconnect I/O Cable Assembly 26.2 ft. (8 m)
16137-120 Unterminated Interconnect I/O Cable Assembly 49.2 ft. (15m)
16137-121 Unterminated Interconnect I/O Cable Assembly 98.4 ft. (30 m)
