Siemens APACS+ - Specifications; Environmental Specifications; Table 6-1 EAM Environmental Specifications

SD39EAM-1r4 Specifications
September 2005 6-1
6 Specifications
This section provides specifications for the APACS+ Enhanced Analog Module (EAM).
6.1 Environmental Specifications
Table 6-1 lists the environmental specifications for the EAM.
Table 6–1 EAM Environmental Specifications
CATEGORY SPECIFICATIONS DATA
Coolin
g
Convection onl
y
IEC Class Bx
Operating Temperature
-25 to 60°C (-13 to 40°F), measured 1/4" below rack
Operating Humidity 5 to 95% Non-Condensing
Temperature and
Humidity
Maximum Moisture Limits 0.028 lb water/lb air
Temperature
-25 to 85°C (-13 to 185°F)
Storage
Temperature
& Humidity
Humidity 0 to 100% Condensing
Temperature
-25 to 50°C (-13 to 122°F)
Enclosure External
Temperature and
Humidty
Humidity 0-100% condensing
Immunity, Radiated IEC 801-3
Electromagnetic Field (RFI) 10 V/m @ 27 to 1000 MHz
Immunity, Power Lines IEC 801-4
& I/O, Fast Transients Power: 4 kV, I/O: 2 kV
Immunity, Surge, Power
Lines
IEC 801-5, 4 kV
Electrical
Immunity, Electrostatic
Discharge (ESD)
IEC 801-2
Contact Discharge: 8 kV
Air Discharge: 15 kV Air