Siemens ARCADIS Orbic - Page 44

44 3D Reconstruction Upgrade Part 3
ARCADIS Orbic SPR2-320.814.02.01.02 Siemens AG
01.05 CS SD 24
Page 44 of 46
Medical Solutions
Fig. 47: Label_4
• Attach the large and small label for 3D reconstruction to the unit as shown in
(a/b/Fig. 45 / p. 43).
• Affix the safety label to the cover of the cable module as shown in (Fig. 46 / p. 43). Also
affix the second safety label to the cable module cover on the opposite side of the other
label.
• Affix the 3D label to the ARCADIS Orbic C-arm (see (1/Fig. 46 / p. 43)) and the monitor
trolley (see (1/Fig. 47 / p. 44)).