Digital Electronic Modules
11-68
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
11.17 2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A Digital Electronic
Module (6ES7 132-4HB00-0AB0)
Order Number
6ES7 132-4HB00-0AB0
Note
If you connect an extra-low voltage system (SELV/PELF) on one channel of the
2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A, you can only use an extra-low
voltage system (SELV/PELF) on the other channel.
As of version 2 of the 2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A there is no
longer an internal jumper between terminals 2 and 6. If you need this jumper, you
can replace it with an external jumper between terminals 3 and 7 (see
Figure 11-16).
Features
Digital electronic module with two relay outputs
Output current 5 A per output
Rated load voltage up to 120 VDC and up to 230 VAC
Suitable for solenoid valves, DC contactors, and indicator lights
Isolated from the supply voltage
!
Caution
The rated supply voltage of the 2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A is
24 VDC. The 2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A can only be located in a
potential group with 24 VDC (from the power module).
To Next Page
Loading...
