Siemens ET 200S - Page 364

Analog Electronic Modules
12-8
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
12.1.2 Analog Value Representation for the Measuring Ranges of the
Analog Input Modules in SIMATIC S7 Format
Introduction
The tables in this section contain the digitized analog values for the measuring
ranges of the analog input modules.
The binary representation of the analog values is always the same, so these tables
only compare the measuring ranges and the units.
Measuring Ranges for Voltage: " 80 mV, " 2.5 V, " 5 V, " 10 V
Table 12-4 SIMATIC S7 Format: Measuring Ranges "80 mV, "2.5 V, "5 V and "10 V
Measuring
Measuring Measuring Measuring Units
Range
" 80 mV
Range
" 2.5 V
Range
" 5 V
Range
" 10 V
Decimal Hexadec.
Range
> 94.071 > 2.9397 > 5.8794 > 11.7589 32767 7FFF
H
Overflow
94.071 2.9397 5.8794 11.7589 32511 7EFF
H
: : : : : :
Overrange
80.003 2.5001 5.0002 10.0004 27649 6C01
H
80.000 2.5 5.00 10.00 27648 6C00
H
60.000 1.86 3.75 7.50 20736 5100
H
: : : : : : Rated range
– 60.000 – 1.86 – 3.75 – 7.50 –20736 AF00
H
– 80.000 – 2.50 – 5.00 – 10.00 –27648 9400
H
– 80.003 – 2.5001 – 5.0002 – 10.0004 –27649 93FF
H
: : : : : :
Underrange
– 94.074 – 2.9397 – 5.8796 – 11.759 –32512 8100
H
< – 94.074 < – 2.9397 < – 5.8796 < – 11.759 –32768 8000
H
Underflow