4 IQ-SENSE
13-10
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
13.2.1 Standard
Feedback Interface (PII)
Table 13-2 Standard Feedback Interface
Address
Assignment
Byte 0 Bit 7: 0 (unassigned)
Bit 6: 0 (unassigned)
Bit 5: 0 (unassigned)
Bit 4: 0 (unassigned)
Bit 3: Circuit state sensor on channel 3
1: Object detected
0: Object not detected
Bit 2: Circuit state sensor on channel 2
1: Object detected
0: Object not detected
Bit 1: Circuit state sensor on channel 1
1: Object detected
0: Object not detected
Bit 0: Circuit state sensor on channel 0
1: Object detected
0: Object not detected
13.2.2 Enhanced
Feedback Interface (PII)
Table 13-3 Enhanced Feedback Interface
Address
Assignment Designation on
“IQ-SENSE Opto” FB
Byte 0 Bit 0: Circuit state sensor on channel 0 Q_CH0Byte 0 Bit 0: Circuit state sensor on channel 0 Q_CH0
1: Object detected1: Object detected
0: Object not detected0: Object not detected
Bit 1 to bit 7:
Acquired sensitivity/distance values
on channel 0 by teach-in *
TEACH_VAL_OUT
To Next Page
Loading...
