Siemens ET 200SP HA - 8 Technical Specifications

Technical speci󹪝cations
8
8.1 Technical speci󹪝cations
Article number 6DL1155-6AU00-0PM0
General information
Product type designation IM 155-6 PN
HW functional status FS03
Firmware version V1.1
Vendor identi󹪝cation (VendorID) 02AH
Device identi󹪝er (DeviceID) 030FH
Product function
• I&M data
Yes; I&M0 to I&M3
Engineering with
• STEP 7 TIA Portal con󹪝gurable/integrated
from version
V16
• STEP 7 con󹪝gurable/integrated from version
V5.6
• PCS 7 con󹪝gurable/integrated from version
V9.0
• PCS neo can be con󹪝gured/integrated from
version
V3.0
Con󹪝guration control
via dataset No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Short-circuit protection Yes
Mains bu󹪜ering
• Mains/voltage failure stored energy time
10 ms
Input current
Current consumption, max. 700 mA; +19.2 V to +28.8 V DC
Inrush current, max. 5 A
I²t 0.36 A²·s; Due to increased mains bu󹪜ering of 10
ms
Power
Infeed power to the backplane bus 7.5 W; no doubling in redundant mode as the in‐
feed power is also designed as redundant
Power loss
Power loss, typ. 2.4 W
Address area
Address space per module
IM 155-6 PN HA
Equipment Manual, 09/2021, A5E39262148-AE 35