Siemens ET 200SP HA - Page 38

Article number 6DL1155-6AU00-0EM0
General information
Product type designation IM 155-6 PN
Firmware version V1.0
Vendor identi󹪝cation (VendorID) 02AH
Device identi󹪝er (DeviceID) 0309H
Product function
• I&M data
Yes; I&M0 to I&M3
Engineering with
• SPPA-T3000 can be con󹪝gured/integrated
from version
V8.0
Con󹪝guration control
via dataset No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Short-circuit protection Yes
Input current
Current consumption, max. 700 mA; +19.2 V to +28.8 V DC
Inrush current, max. 5 A
I²t 0.36 A²·s; Due to increased mains bu󹪜ering of 10
ms
Power
Infeed power to the backplane bus 7.5 W; no doubling in redundant mode as the in‐
feed power is also designed as redundant
Address area
Address space per module
• Address space per module, max.
256 byte
Hardware con󹪝guration
Integrated power supply Yes; 24 V DC
Rack
• Modules per rack, max.
56; 56 slots for I/O modules + server module (width
without IM ≤ 1.3 m)
Time stamping
Accuracy 1 ms; In compliance with the supplementary con‐
ditions described in the Equipment Manual
Interfaces
Number of PROFINET interfaces 1; 2 ports (switch)
1. Interface
Interface types
• Number of ports
2; via BusAdapter
• integrated switch
Yes
Technical speci󹪝cations
8.1 Technical speci󹪝cations
IM 155-6 PN HA
38 Equipment Manual, 09/2021, A5E39262148-AE