Siemens ET 200SP HA - Page 39

Article number 6DL1155-6AU00-0EM0
• BusAdapter (PROFINET)
Yes; compatible BusAdapters: BA 2x RJ45, BA 2x FC,
BA 2x LC, BA LC/RJ45, BA LC/FC
Protocols
• PROFINET IO Device
Yes
• Open IE communication
Yes
• Media redundancy
Yes; as MRP client
Interface types
RJ 45 (Ethernet)
• Transmission procedure
PROFINET with 100 Mbit/s full duplex (100BASE-TX)
• 100 Mbps
Yes; PROFINET with 100 Mbit/s full duplex
(100BASE-TX)
• Autonegotiation
Yes
• Autocrossing
Yes
Open IE communication
• TCP/IP
Yes
• SNMP
Yes
• LLDP
Yes
Interrupts/diagnostics/status information
Status indicator Yes
Alarms Yes
Diagnostics function Yes
Diagnostics indication LED
• RUN LED
Yes; green LED
• ERROR LED
Yes; red LED
• MAINT LED
Yes; Yellow LED
• ACT LED
Yes; green LED
• Monitoring of the supply voltage (PWR-LED)
Yes; green PWR LED
• Connection display LINK TX/RX
Yes; 2x green link LEDs on BusAdapter
Potential separation
between PROFINET and all other circuits Yes; 1 500 V AC
Permissible potential di󹪜erence
between di󹪜erent circuits Safety extra low voltage SELV
Ambient conditions
Ambient temperature during operation
• horizontal installation, min.
-40 °C
• horizontal installation, max.
70 °C
• vertical installation, min.
-40 °C
• vertical installation, max.
60 °C
Dimensions
Width 50 mm
Height 138 mm
Depth 89 mm
Technical speci󹪝cations
8.1 Technical speci󹪝cations
IM 155-6 PN HA
Equipment Manual, 09/2021, A5E39262148-AE 39