Siemens FDOOT241-9 - Interface to Service Devices; Line Tester

Structure and function
31
Building Technologies 007004_k_en_--
Fire Safety & Security Products 16.04.2009
3.4.11 Interface to service devices
All point detectors have a non-contact interface to the detector exchanger and
tester FDUD29x (service device for commissioning and maintenance). The
detector exchanger and tester communicates with the detector via this interface
(MC link). Detailled information is listed in the operating instructions for the detector
exchanger and tester (see documents 007227 and 009718).
See also
 Status polling with the detector e
xchanger and tester [J 80]
3.4.12 Line tester
The line tester FDUL221 is able to recognize and localize the following errors on
the FDnet:
z Wiring error
z Open line
z Short-circuit
z Ground fault
In addition, the line tester recognizes the devices connected to the FDnet detector
line. For details, see document 008250.