Siemens Flender KMPP Series User Manual

49 / 84
BA 9142 en 02/2015
NOTICE
Property damage
With larger filled-in quantities of the Corrosion Inhibitor N 213 (above 5 % of the operating oil quantity),
the mixture of operating oil and Corrosion Inhibitor N 213 must not be used as operating oil. The gear
unit must be flushed thoroughly with operating oil before start-up, after draining the mixture of operating
and preservative (in this regard, see item 10.4.)
Table 10: Restart of preserved gear units, which have already been in operation
Kind of operating oil Kind of preservation Procedure before start-up
Mineral oil
Oil on PAO-basis
– Castrol Corrosion Inhibitor N 213
<= 5 % operating oil
– fill with operating oil.
Mineral oil
Oil on PAO-basis
– Castrol Corrosion Inhibitor N 213
> 5 % operating oil
– drain preservative oil, flush with
operating oil and fill with new operating
oil.
Mineral oil
Oil on PAO-basis
– completely filled with the
approved oil (see specification in
BA 7300)
– for operating oil: drain oil until operating
oil level is reached.
– other than operating oil: drain oil and fill
with new operating oil.
Mineral oil
Oil on PAO-basis
– Castrol Alpha SP 220 – fill with operating oil.
Mineral oil
Oil on PAO-basis
– Tribol 1390
– flush with operating oil and fill with new
operating oil.
NOTICE
Property damage
With larger filled-in quantities of the Corrosion Inhibitor N 213 (above 5 % of the operating oil quantity),
the mixture of operating oil and Corrosion Inhibitor N 213 must not be used as operating oil. The gear
unit must be flushed thoroughly with operating oil before start-up after draining the mixture of operating
and preservative (in this regard, see item 10.4.)

Siemens Flender KMPP Series Specifications

General

Brand	Siemens
Model	Flender KMPP Series
Category	Industrial Equipment
Language	English