Siemens hicom 150 e - Configuring the Hicom Attendant P; Entering Settings

Configuring the Hicom Attendant P
102
Configuring the Hicom Attendant P
Entering Settings
When you have finished installing the Hicom Attendant P program
on the attendant console, start the program.
The first time you start Hicom Attendant P, a window automatically
opens in which you can select the language for Hicom Attendant P.
Click OK to confirm your selection. The Settings window automati-
cally opens. You can configure the Hicom Attendant P using this
window.
(To access this window, select the Settings option from the File
menu.)
Enter data under the seven tabs using the following procedures.