Siemens hicom 150 e - Installing the Hardware; System Requirements

Installing the Hardware
88
Installing the Hardware
You have two options for connecting the Hicom Attendant P to your
PC:
z
Via the optiset E control/data adapter and the optiset E
advance plus/comfort or memory system telephone.
z
Via the U
P0/E
PCI card with handset cradle and handset.
Before beginning installation, make sure that your system meets
the requirements listed below
System Requirements
z
PC with a Pentium 133 MHz processor or higher
z
16 MB of RAM
z
Super VGA with 800x600 pixel resolution
z
Sound card with speaker for ringer signaling
z
Microsoft-compatible mouse
z
Windows 95/98 operating system
z
Hicom 150 E Office (Release 1.0/2.0/2.2)
z
3.5 inch diskette drive or CD ROM drive
z
Free RS-232 interface (COM ports 1 – 4) for optiset E control/
data adapter with optiset E advance pluls/comfort, memory,
advance conference/conference system telephones
Alternative: Free long PCI slot for U
P0/E
PCI card with handset
cradle and handset or with headset