Siemens hicom 150 e - Backing up the ETD Database

Configuring the Hicom Attendant P
118
Click the Cancel button in the directory’s main window to exit the
ETD and return to the attendant monitor.
Backing up the ETD Database
At regular intervals, you (or the system administrator) should up the
file in which the Hicom Attendant P stores the electronic directory
data.
This file is located in the root directory for the Hicom Attendant P
(for example, under C:\Program Files\Hicom Attendant P) and is
called set3.mdb.
Copy this data to the backup directory of your choice.
Click the save icon to save the data.
Click the Cancel button to return to the directory’s main
window (
Æ
114). The new station and its most important data are
displayed here.
If you click the Cancel button without saving the record, the
record is lost and you are returned to the directory’s main
window.