Siemens hicom 150 e - Problem Correction; The Attendant P Does Not Start Correctly; The Attendant P Is no Longer Responding

Problem Correction
124
Problem Correction
The Attendant P does not start correctly
z
Check whether the U
P0/E
PCI card (if present) has been as-
signed an interrupt, an I/O address, and COM3 (or COM4).
z
Check whether the drivers for the U
P0/E
PCI card (if present)
were installed (
Æ
93).
z
Check whether the U
P0/E
PCI card (if present) is securely
plugged into the computer slot.
z
Check whether you have too many other programs open.
z
Shut down your computer and switch it off and on.
The Attendant P is no longer responding
z
Close any 16-bit applications that are open (such as Word 6.0).
z
Check whether the Hicom system is still operating by verifying
another telephone’s operation (the system may have failed).
z
Shut down your computer and switch it off and on.