Technical Information
2.2 Design
LDS 6
Operating Instructions, 01/2009, A5E00295894-05
13
2.2 Design
The gas analyzer LDS 6 consists of a central unit and up to three in-situ sensors. The
connection between the central unit and the sensors is established by a so-called hybrid
cable, which contains optical fibers and copper wires. An additional cable connects the
transmitter and receiver parts of the cross-duct sensor.
Central unit
The central unit is housed in a 19" rack with 4 holders for mounting in a hinged frame in
racks with or without telescopic rails.
The LDS 6 operates as an independent unit powered by a 100-240 V AC main power supply.
Figure 2-2 CentralUnit
To Next Page
Loading...
