Siemens MAMMOMAT Inspiration - Recommended Frequency of QC Tests

Introduction
8 Quality Control Manual
SPB7-330.640.01.01.02
Recommended Frequency of QC Tests
The following table describes when the different tests must be performed and by
whom.
Table 1 Frequency of Tests
Te s t MEE Annually Monthly When
needed
1. AEC Test
MP MP
2. Artifact Detection
MP T
3. Detector Uniformity
MP T
4. Detector Linearity
MP MP
5. Phantom Imaging Quality
MP T
6. Spatial Resolution (optional)
T
7. Mechanical Tests
MP MP
8. Acquisition Workstation Monitor Check
MP MP
9. Printer Check (optional)
MP MP