Test 8: Acquisition Workstation Monitor Check
MAMMOMAT Inspiration 45
SPB7-330.640.01.01.02
Performance Criteria and Corrective Action
• The 5% and 95% squares shall be visible. (The preset values for brightness
and contrast on the monitor may not be adequate to fulfill this requirement.
Adjust brightness and contrast according to
For the qualification of the
printer please follow the printer manufacturer’s recommendations. and
repeat
Test 8: Acquisition Workstation Monitor Check.
• All different bar patterns in the four corners and in the center in the image
(see of the Figure 10) shall be visible.
If any level is found to be beyond any action level stated, the source of the
problem must be identified and the problem corrected by a Siemens customer
service engineer and successfully retested by the MP before further
examinations are performed using the system.
To Next Page
Loading...
