Siemens micromaster 410 - Figure 2-6 Mounting Brackets

2 Installation Issue 04/02
MICROMASTER 410 Operating Instructions
24 6SE6400-5EA00-0BP0
2.7.1 Mounting Brackets
The MICROMASTER 410 can be mounted using mounting brackets, which are
slotted into the heatsink at the rear of the inverter for normal mounting position (see
Figure 2-6 A. For side mounting of the inverter the brackets are slotted into the
heatsink as shown in Figure 2-6 B.
Figure 2-6 Mounting Brackets