Siemens MindConnect Nano - Page 49

For the OPCUA protocol, the data source input supports the following parameters:
Parameter Description
Protocol Shows the selected protocol type
Name Name of the data source
Description Add a description for data source
Reading Cycle Enter a reading cycle for the data source
OPC UA
Server Name
Enter the name of the OPC UA Server Name
OPC UA
Server
Address
Enter the OPC UA Server Address
OPC UA
Server IP
Address
Enter the OPC UA Server IP Address
OPC UA
Authentication
Type
You can choose between the following types:
- NONE: No authentication enabled
- BASIC: Enables the OPC UA BASIC authentication
OPC UA
Security Mode
You can choose between the following modes:
- NONE: No security mode
- CERTIFICATE: Enables to upload a certificate in the following formats: *.pfx, *.pf12,
*.cer, *.crt, *.der, *.p7b, *.p7r, *.spc
Configuring protocols
4.3 Overview of OPC UA protocol for MindConnect Nano
MindConnect Nano
System Manual 7/202349