• S51 to S54
• BP10/11/18/19/24/25
Lamps
The control system controls the lamps HS1 to HS4 and HS7 to HS10.
Alternatively, HS1 to HS4 and HS7 to HS10 can also be activated externally non-isolated.
4.3 Rear side
Assembled PCB COM board IE
S1 (jumper) Setting the handwheel signal type
S1 opened: TTL connection
S1 closed: dierential connection
S2 Setting the MPP address
(see chapter: "Interfaces" → "Description" → "COM board")
Diagnostics LEDs LED1 (H1) POWER OK (green)
LED2 (H2) Bussync
LED3 (H3) Busfault
Assembled PCB customer keys
Diagnostics LEDs LED1 (H1) Voltage monitoring of customer keys
LED2 (H2) Voltage monitoring of customer keys
LED3 (H3) Voltage monitoring of customer keys
Operator control and display elements
4.3 Rear side
Machine Pushbutton Panel: MPP 464 IE H
38 Equipment Manual, 03/2021, A5E50810237B AA
To Next Page
Loading...
