Installation
7-5
MP270 Equipment Manual
Release 01/99
Configuration options
Figure 7-1 illustrates a number of configuration options for the MP270, PLC and
periphery equipment.
IF1A IF2 IF1B
MP270
Power supply
Connection for
backup battery
Optionally
Optionally
PLC PLC PROFIBUS-DP
SIMATIC S5
SIMATIC 505
PC
Other PLCs
SIMATIC 505
SIMATIC S7
Other PLCs
PC
PG 7xx
ESC/P, 9 Pin ESC/P, ESC/P2
PCL
Configuration computer Printer
Serial
DIL switches
(Settings, see Page 7-9)
Grounding connection
Figure 7-1 Configuration options
Detailed information on the connection options is provided on the following pages
of this chapter. Refer to Appendix B for information on the connection plug pin
assignment for the interfaces.
To Next Page
Loading...
