MAINTENANCE
The OCM-3 requires very little maintenance due to its solid-state circuitry. However, a
program of periodic preventative maintenance should be initiated. This should include
regular inspection, general cleaning, overall system performance checks and standard
good housekeeping practices.
A periodic inspection of the transducer is recommended, at which time any build-up of
material on the face should be removed.
The enclosure should be cleaned using a vacuum cleaner and a clean, dry brush.
For battery replacement refer to Installation / Installing the Memory Back-up Battery.
7ML19985AB01 OCM III 99
To Next Page
Loading...
Need help?
General
