24
Station Speed Dialing
Station Speed Dialing lets you assign frequently used dialing
sequences (extensions, outside numbers, or feature access
codes) to each of ten single-digit codes (0 through 9). You can
then dial a single-digit code instead of the entire sequence. You
can also be set up at the communications server for up to 30
codes, in groups of 10. If you are set up for more than ten, they
follow a double-digit scheme (00 through 29).
To set up a station speed code,
1.
Press the Station Speed (SPEED) key
twice, or get a dial tone and dial
# #
3.
2. Enter the station speed code.
3. Enter the dialing sequence. Then hang up.
To dial using a station speed code,
1. Press the Station Speed (SPEED) key.
2. Listen for the confirmation tone.
3. Dial the station speed code.
OR
1. Get a dial tone.
2. Dial # 3 and then the station speed code.
SPEED SPEED
SPEED
To Next Page
Loading...
Need help?
General