26
System Speed Dialing
If the System Speed Dialing feature is set up on your
communications server, you can dial frequently called outside
numbers (local, long distance, and international) by dialing a
code number. Usually these codes are published for an entire
company in a special system speed directory. Consult your
system administrator if you do not know your system speed
numbers. Your company may have up to sixteen system speed
lists. You may have access to two of these lists. For release 6.5
and above, you may have access to two of these lists or to the
first ten lists plus one additional list. A number set up for a
system speed code can contain an initial Personal Identification
Number (PIN), if one is necessary to make outside calls.
To make a system speed call,
1.
Press the correct System Speed key (SYS-SP1 for
the first System Speed list or SYS-SP2 for the
second). Or, get a dial tone and dial # 6 1 for the
first list or # 6 2 for the second.
2. Dial the system speed code.
SYS-SP1
To Next Page
Loading...
Need help?
General