25
System Hold
System Hold lets you move a call to a system slot (a temporary
holding place) and hold it there. The call can then be retrieved
from any extension.
To place a call on system hold,
1.
Press the Transfer (TRANSFR) key. You will hear
the confirmation tone and dial tone. Dial
∗
8.
2.
Enter a slot number (0-9). If you hear a busy signal,
try a different slot number. If all slots are full, you
will hear a fast busy signal. Then hang up.
To retrieve a call on system hold,
1. Get a dial tone.
2.
Press the System Hold (SYSHOLD) key, or
dial
∗
8.
3.
Dial the number of the system slot where the call is
on system hold.
TRANSFR
SYSHOLD
To Next Page
Loading...
Need help?
General