Siemens PCS 7 - Changing Settings for Encrypted Communication (Situations)

Topic Detailed information Called via Additional information
Device status ● Communication
● Maintenance status
● Process errors
● Configuration errors
● Overall status
● Device-specific
messages
Open project in the Process
Device Plant View > Select
Device > Edit > Object
Properties > "Diagnostics" tab
> "Device status" list
Online help for SIMATIC
PDM , if manufacturer
files are available in it
Document
Manager
Call documents
assigned to a device
Open project in the Process
Device Plant View > Select
device > Edit > Object
properties > "Document
Manager" tab
Online Help for
SIMATIC PDM
Determine field
devices online
(LifeList, as of
SIMATIC PDM
V8.0 SP1)
LifeList – determine
available devices
(PROFIBUS/
FOUNDATION
Fieldbus)
In the Siemens SIMATIC
programs Start menu:
SIMATIC PDM > LifeList
Operator manual
SIMATIC;
Help for SIMATIC PDM
7.18.8 Additional diagnostic options
7.18.8.1 Additional diagnostic options for PCS 7
Disclaimer of liability
WARNING
Siemens assumes no liability for improper use of the instructions provided in this
documentation and for any consequences that might result for the customer.
WARNING
Note the following:
● Only trained service employees should be authorized to work on the process control
system.
● Always observe the plant-specific rules and government regulations when making
changes to your system.
● Observe the plant-specific boundary conditions and adjust the work accordingly.
● Always bear in mind that changes in a system can impact other sections of the system.
Diagnostics in PCS 7
7.18 Diagnostic tools
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02 115