Creating a backup
1. Select the multiproject/project in the SIMATIC Manager.
2. Select the Options > SIMATIC Route Control> Engineering menu command.
The "Route Control Engineering - ..." dialog box opens.
3. Select the menu command Options > Export/Import CSV > CSV Export/Import Wizard ....
The "Wizard: CSV file data exchange (Export/Import)" opens.
4. Check the path in the "Directory" input box.
5. In the "Direction" group, activate the check box "RC project engineering >> CSV file(s)
(Export).
6. Click "Continue".
7. Select all check boxes.
8. Click "Continue".
9. Click "Finish".
The files are exported.
Additional information
● Manual
Process Control System PCS 7; SIMATIC Route Control
3.2.5.3 How to restore data from a backup
Introduction
You restore partial routes from SIMATIC Route Control from a backup file.
Importing a backup
1. Select the multiproject/project in the SIMATIC Manager.
2. Select the Options > SIMATIC Route Control> Engineering menu command.
The "Route Control Engineering - ..." dialog box opens.
3. Select the menu command Options > Export/Import CSV > CSV Export/Import Wizard ....
The "Wizard: CSV file data exchange (Export/Import)" opens.
4. The dialog box "Wizard: CSV file data exchange (Export/Import)" opens.
5. Check the default path set in the "Directory" input box.
6. In the "Direction" group, activate the check box "CSV file(s) >> RC project engineering
(Import).
7. Click "Continue".
8. Select all check boxes.
9. Click "Continue".
10.Click "Finish".
The project engineering data are imported.
Ensuring Availability
3.2 Data backup
Service support and diagnostics (V8.0)
30 Service Manual, 03/2012, A5E02779775-02
To Next Page
Loading...
