Siemens PCS 7 - SIMATIC NET Switches - SCALANCE X-300; X-400; Network Connections Windows Dialog Box; Ncm S7

7.18.3.3 SIMATIC NET switches - SCALANCE X-300 / X-400
Calling
Called via the Web user interface or TELNET
Overview
Topic Detailed Information Called via Additional information
Redundancy Observer function fault
diagnostics and fault
protection for high speed
redundancy (HSR).
Enter the following in
the "Run" dialog of the
Start menu: "cmd"
In the DOS window,
enter TELNET .
Additional information
in the documentation
SIMATIC NET;
Industrial Ethernet
Switches SCALANCE
X-300 / X-400
Documentation
SIMATIC NET; Industrial
Ethernet Switches
SCALANCE X-300 /
X-400
7.18.3.4 "Network Connections" Windows dialog box
Overview
Topic Detailed information Called with Additional information
Status of network
cards on
Industrial
Ethernet
Dynamic display of the status
of physical and virtual
network adapters
In the Start menu via the
Network Connections
Online help of the
operating system
7.18.3.5 NCM S7
Calling
In the Siemens SIMATIC programs Start menu: STEP 7 > NCM S7 > Diagnostics
Diagnostics in PCS 7
7.18 Diagnostic tools
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02 99