3. Double-click the "Hardware" object in the detail window.
HW Config opens.
4. Double-click the module you wish to check.
The properties dialog box for the selected module opens.
5. Browse the individual tabs for appropriate options.
Activate the diagnostic properties depending on the module type.
Available diagnostic options can be found in the following tabs:
– Diagnostics"
– Inputs"
– Outputs"
– Options"
SIMATIC modules with diagnostic properties
The following components are available in PCS 7 diagnostic-capable modules:
● S7-400
● S7 300 modules
● ET 200M
● ET 200S
● ET 200iSP
● ET 200pro
● DP slaves
● DP/AS-i link
● Diagnostic repeaters
● Network components (SCALANCE; OSM, ESM)
Additional information
● Online help
PC DiagMon
Configuring diagnostics conditions
4.1 Requirements for diagnostics
Service support and diagnostics (V8.0)
52 Service Manual, 03/2012, A5E02779775-02
To Next Page
Loading...
