The Keypad and Display Interface Perfect Harmony GENIII/e User’s Manual
3-34 A1A19000405A: Version 1.3
3
Display Bypass Status 2620 Function
Displays bypass status: Same
format as for cell status.
A = available,
B = active,
U = unavailable.
Reset Bypassed Cells 2640 Function
Allows bypassed cells to be reset
when the drive is in an idle state.
Use the reset function only after
verifying that the problems with the
faulted cell(s) have been resolved.
Neutral Connection 2630 T2
Select the terminal, T1 or T2, which
forms the neutral connection. This
selection depends on the terminal of
cells A1, B1, and C1 that is used to
form the drive start-point neutral.
Parameter ID Units Default Min Max Description
To Next Page
Loading...
