5 - 1
Siemens AG SPR8-125.034.02 Page 1 of 2 POLYMOBIL Plus
Medical Solutions Rev. 02 03.05 CS PS 24
Start-up report 5
POLYMOBIL Plus Start-up report 5
The Start-up report follows the same format as the start-up instructions.
Item number / Type number / Serial number: . . . . . . . . . . . . . . . .
Customer: . . . . . . . . . . . . . . . . . . . . Customer number: . . . . . . . . . . . . . . .
1. Nominal line voltage check ..................... V
AC
Measuring inst.Type: . . . . . . . . . . . . . .
Serial No.: . . . . . . . . . . . . . .
Calibrated up to: . . . . . . . . . . . . . .
2. Attaching the warning label ok
3. Check of controls and indicators ok
4. Check of the DAP measuring system (optional) ok
5. Check of the counterbalance system ok
6. Check of controls on the double slot diaphragm ok
7. Check of exposure release with high voltage ok
8. Check of exposure control ok
9. Custom programming
Maximum possible kV:
Maximum possible mAs:
Default exposure parameters:
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
kV
mAs
kV
mAs
10. Coincidence of light and radiation fields
X: . . . . . . . . . .
Y: . . . . . . . . . .
cm
cm
ok
11. Protective conductor measurement
(measured values in separate report
’Protective conductor resistance / report’)
ok
Σ
Σ
To Next Page
Loading...
Need help?
General
