Siemens POLYMOBIL Plus - Troubleshooting; Error Messages Overview

3 - 1
Siemens AG SPR8-125.034.02 Page 1 of 6 POLYMOBIL Plus
Medical Solutions Rev. 02 03.05 CS PS 24
Function checks 3
Checking the nominal line voltage 3
• Using the DVM, measure the local power line voltage at the receptacle.
Attaching the warning label 3
• Attach the warning label printed in the appropriate language, item number 18 13 554,
to the operating console (1/Fig. 1).
The system automatically self-adjusts to the existing power line
voltage.
The warning label is located in the POLYMOBIL Plus binder.
NOTE
NOTE
kV mAs
µGy m
2
MOB00675
1
Fig. 1