Siemens POLYMOBIL Plus Start-Up Instructions

1 - 1
Siemens AG SPR8-125.034.02 Page 1 of 10 POLYMOBIL Plus
Medical Solutions Rev. 02 03.05 CS PS 24
Requirements 1
Text emphasis 1
Symbols 1
Checks and adjustments that must be performed with radiation ON are identified by the
radiation warning symbol.
This symbol means "Dangerous voltage".
Checks marked with this symbol are to be entered into the test certificate at the end of
these instructions.
This symbol means "Attention, consult the documentation".
This symbol indicates components sensitive to Electro-Static Discharge (ESD).
DANGER indicates when there is an immediate danger that leads
to death or serious physical injury.
WARNING indicates a risk of danger that may lead to death or to
serious physical injury.
CAUTION used with the safety alert symbol indicates a risk of
danger that leads to slight or moderate physical injury and/or
damage to property.
NOTICE used without the safety alert symbol indicates a risk of
danger that if disregarded leads or may lead to a potential situa-
tion which may result in an undesirable result or state other than
death, physical injury or damage to property.
NOTE contains information provided with special emphasis to
facilitate proper use of the equipment or proper execution of a
procedure, i.e. hints, tips.
DANGER
WARNING
CAUTION
NOTICE
NOTE

Siemens POLYMOBIL Plus Specifications

General

Brand	Siemens
Model	POLYMOBIL Plus
Category	Medical Equipment
Language	English