POLYMOBIL Plus SPR8-125.034.02 Page 2 of 10 Siemens AG
Rev. 02 03.05 CS PS 24 Medical Solutions
1 - 2 Requirements
Tools and measurement devices required 1
• Standard service kit *
• Protective conductor test meter
• Device leakage current meter
• Digital multimeter.
Safety information and protective measures 1
All tools, measurement and auxiliary devices, with the exception
of those marked "* ", are listed in the STC (Service Tools Cata-
logue) along with their specifications.
Danger of injuries, death or material damage.
Observe
- the product-specific safety information in these instructions,
- the general safety information in the document
TD00-000.860.01...
and
- the safety information according to ARTD Part 2.
Non-compliance can lead to death, to injuries or to material dam-
age.
X-ray radiation!
Non-compliance can lead to illnesses, irreversible damage to
body cells and to the genetic make-up, sever injuries, up to death.
In work on the system in which radiation has to be released, the
radiation protection directives and the rules for radiation protec-
tion according to ARTD-002.731.02 must be complied with.
Observe the following:
- Use available radiation protection devices.
- Wear radiation protection clothing (lead apron).
- Keep distance from the radiation source as large as possible.
- Release radiation only if necessary.
- Set radiation activity as low as possible.
(low KV and mAs values)
- Release radiation as short as necessary.
Checks in which radiation has to be released are identified by the
radiation protection warning symbol.
NOTE
WARNING
WARNING
To Next Page
Loading...
Need help?
General
