Presence detection
Presence detection using the built-in PIR sensor
5
A6V10877569_en--_e 19 | 59
Sensor detection range
A The width of each cell. It is 80 cm (31 in).
B The thermostat.
C The height of each cell. It is 80 cm (31 in).
D The area that the PIR sensor can detect.
Change from “Unoccupied” to “Comfort” when an unoccupied
room becomes occupied
1. On the Home screen, tap , tap and then tap .
2. If prompted, enter the administrator password.
3. Tap , tap , and then tap . Scroll down and tap “Room presence detector”.
4. Drag the slider to the right.