Siemens RDS110 - Switching between Heating and off Modes

Operating the thermostat from the mobile app
Switching between heating and OFF modes
9
A6V10877569_en--_e 51 | 59
Change the preset setpoints for different operating modes
1. On the temperature control widget screen, tap .
2. Tap any of the working modes, for example, “Unoccupied”, to expand the
preset setpoints.
3. Drag the temperature slider to the setpoint as desired. If you’ve adjusted to a
new heating setpoint that is higher than the current room temperature, the
system turns on heating.
9.11 Switching between heating and OFF modes
To switch between “Heat” and “Off”
1. On any widget screen, tap , and then expand the drop down list beside
“Thermostat mode”.
2. Select “Heat” or “Off”.