•
If the device has been in storage for more than 2 years, connect it to an auxiliary voltage for 1 to 2 days.
This action will cause the electrolytic capacitors to form on the printed circuit board assemblies again.
•
If devices are to be shipped elsewhere, you can reuse the transport packaging. Storage packing of the
individual devices is not adequate for transport purposes.
First Steps
1.1 Unpacking, Repacking, Returning, and Storing
Reyrolle 7SR5, Operating, Manual 13
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
