General
All 7SR5 devices can be operated via the Reydisp Manager 2 interface of your PC and via the on‑site operation
fascia front panel.
Operation is via the push buttons on the relay. LEDs and large HMI screen provide information to the operator.
Operating Concept
The operating concept allows you to do the following on‑site operator actions:
•
Navigation in the menu tree
•
Modification of settings
•
Resetting saved information
•
Showing default and control displays, measured values and logs
•
Executing switching operations with large graphical HMI screen
•
Initiating configured actions via function keys
•
Binary output test from Maintenance menu
•
Status display with LED
•
Function configuration
•
Configuring inputs, outputs and LEDs
•
CT/VT configuration
•
Setting serial communication parameters
•
Display device information such as firmware version, and IP address
4.1
Using the Device Fascia
4.1 General
42 Reyrolle 7SR5, Operating, Manual
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
